Smart Detection Alarm for Fire Smoke / Combustible Gas / Infrared Sensor, Lora / Lorawan / RS485/4G

Smart Combustible Gas Alarm with Remote Control

The GDA-TW combustible gas detector (LoRaWAN) is a high stability combustible gas detector (hereinafter referred to as the detector), which is used to detect the leakage of combustible gas. The detector adopts advanced semiconductor gas sensor, which has stable operation, long service life and simple installation. The detector has a built-in MCU for central control processing, and each functional block is directly or indirectly connected to the I/0 port line of the MCU. The normal work of each functional module of the detector is completed through the program solidified in the MCU, so that the detector works more stable, safe and reliable. This product is suitable for safety monitoring in places where combustible gas exists, such as family residences, real estate villas, hotels and apartments.

Our Advantages

1.Small size and strong applicability.

2. The product itself has waterproof function.When the water level is higher than the leakage alarm, the water immersion detector will automatically float on the water surface.

3. Active upload: when water leakage and battery undervoltage are detected, the data will be actively uploaded to the corresponding platform through the LoRaWAN wireless network;Upload normal information (heartbeat) every 24 hours (settable).

4. ABS plastic has the function of high temperature resistance and low temperature resistance to adapt to more environments.

5. High reliability sensor.

6. Automatic reset.

7. Adopt microprocessor control.

8. Automatic fault detection indication.

9. Detection of natural gas, liquefied petroleum gas, etc.

10. Active upload/two-way transmission function:The data will be actively uploaded to the corresponding platform through the LoRaWAN network when alarm occurs. Upload normal information every 24 hours(settable). Real time response to instructions issued by the platform.

Operating Instrutions

Smart Wireless LoRaWan Infrared Sensor Alarm

The smart infrared sensor alarm uses a dual-element infrared digital probe. It has the characteristics of high input impedance, high power supply rejection ratio, strong anti-radio frequency interference, and low power consumption. It can cooperate with the microprocessor to realize different application scenarios, and has two modes: intrusion monitoring and nursing monitoring (alarm when unattended). Support remote control through wireless LoRaWAN network communication. Support to build intelligent IoT network together with LoRaWAN gateway and TimeWave IoT platform. And realize scene linkage with other smart devices.

1.Dual-element digital infrared probe with high reliability;
 

2.It adopts SMD technology and is good anti-radio frequency and anti-white light interference.
 

3.Three modes are optional: normal mode for intrusion monitoring, smart mode for intrusion monitoring, and nursing mode (alarm when unattended in 8/12/22 hours);
 

4.LoRaWAN wireless communication. Support alarm push from server, WeChat official account, phone and SMS;
 

5.GNSS reports position information, which facilitates the integration of pathing and scheduling task planning systems;

Product Parameters

​

Operating Voltage	DC3V (two CR123A 3V)
Quiescent Current	≤25uA
Operating Current	≤200mA
Low pressure alarm	≤2.7V (heartbeat or trigger report)
Detection distance	6-9m
Wireless method	LoRaWAN wireless communication. Detection angle is 80°
LoRaWAN Frequency	CN470,RU864,IN865,EU868,US/AU915,KR920,AS923_1/2/3/4,Customizable frequency band
Detected walking speed	0.3 m/s-3 m/s
Alarm indication	Red LED. When the light is on, it means that the human body signal is detected and it is valid
Network status indicator light	Green LED: Flickers when networking. Always on when the device is connected to the Internet and data is being sent. Off means the device is in sleep mode
Relative humidity	5%-95%RH (no condensation)
Installation method	Wall mounted or corner installation. Installation height: 1.7m - 2.2m
Storage temperature	-10ºC - + 65ºC
Detector size	107mmx52mmx41mm (without bracket)

​Wireless Independent Photoelectric Fire Smoke Detection Alarm

The photoelectric fire smoke detection alarm can detect the smoke generated during a fire and send out an alarm signal in time. Upload to TimeWave IoT platform through LoRaWAN wireless way. This product is suitable for fire safety alarm monitoring in places where combustible gas exists, such as family residences, real estate villas, hotels, and apartments.

1.Low power consumption;

2.With self-test function and prompt function of power supply undervoltage;

3.Balanced response to four types of fire, stable and reliable performance, etc.

Product Parameters

​

Executive standard	GB20517-2006
LoRaWAN Frequency	CN470,RU864,IN865,EU868,US/AU915,KR920,AS923_1/2/3/4. Customizable frequency band
Operating voltage	DC3V (2 AA alkaline batteries zinc manganese)
Standby current	≤5uA
Alarm current	<40mA
Alarm indicator	Red
Alarm sound pressure	>85dB
Operating temperature	-10ºC ~ +50ºC (indoor use)
Operating humility	≤95% RH (no condensation)

After Sales Service

Company Profile

 

Wuhan Timewave IoT Technology Co., Ltd. is a high tech enterprise specializing in the application of Low Power Wide Area Network (LPWAN) core technologies to establish an energy monitoring service platform. We provide a one-stop solution and service for our clients, offering metering and communication equipment, software system platforms, project construction, and daily operation and maintenance.

We independently develop and manufacture the "Timewave" brand LPWAN smart energy meters, smart water meters, smart gas meters, and alarm systems, among other communication terminal products. Coupled with the "Timewave Cloud" energy supervision platform, which encompasses metering, meter reading, billing, management, and control of water, electricity, gas, and heat, we can provide and implement automatic meter reading and billing, carbon emission monitoring, safe electricity use, energy consumption analysis, energy-saving analysis, transformer monitoring, data center environment monitoring, and intelligent operation and maintenance. We have a wealth of experience in the practical application of water and electricity meters using LoRaWAN technology.

The "Timewave Cloud" energy supervision platform is widely used in various settings, including campuses, supermarkets, apartments, hospitals, factories, parks, buildings, railways, airports, data centers, and more.We have connected over 200,000 IoT terminals, implemented over 200 projects, and expanded our reach to over 30 provinces and cities across the country. Moreover, we provide operation and maintenance support for ground projects in multiple countries and regions, including Indonesia, Turkmenistan, Laos, North Korea, and Mongolia.

Timewave IoT Technology is committed to solving issues related to difficult meter reading, billing, payment, energy-saving and efficiency improvement, and safe energy use. We aspire to become a leader in the field of energy IoT and energy supervision platforms.